Beam calculators / Material & section models
Trace the load. Understand the beam.
LVL Beam Deflection Calculator
No LVL manufacturer span tables or grade design values are built in. Enter the actual effective bending E. Calculate support reactions, shear force, bending moment, slope and elastic deflection for the stated simply supported beam.
Your beam, explained visually
Pin A · Roller BYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
LVL Beam Deflection: model and interpretation
Continue with: Steel Beam Deflection Calculator · Steel Beam Point Load Calculator · Aluminum Beam Deflection Calculator · Aluminum Beam Point Load Calculator
Check the numbers
LVL Beam Deflection Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 13 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Downward uniform load = 5 kN/m.
| Output | Computed result |
|---|---|
| Maximum absolute elastic deflection | 19.230769 mm |
| Signed extreme deflection | -19.230769 mm upward |
| Deflection extreme location | 3 m from left |
| Maximum absolute deflection | 0.757117 in |
| Signed extreme moment | 22.5 kN·m sagging |
| Signed extreme shear | 15 kN |
| Signed extreme rotation | 0.010256 rad |
| Extreme-fibre bending magnitude | 10 MPa |
| Section Ix | 33,750 cm⁴ |
| Support at x=0 m vertical | 15 kN upward |
| Support at x=6 m vertical | 15 kN upward |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 m | Beam length / first span | 1.201923 mm |
| 4.5 m | Beam length / first span | 6.084736 mm |
| 6 m | Beam length / first span | 19.230769 mm |
| 7.5 m | Beam length / first span | 46.95012 mm |
| 9 m | Beam length / first span | 97.355769 mm |
| 12 m | Beam length / first span | 307.692308 mm |
Unchanged inputs use: Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 13 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Downward uniform load = 5 kN/m. Results retain the model limitations described above.
Common questions
Are the plotted lines also used to locate the maximum?
Does this include shear deformation or lateral-torsional buckling?
What limitation matters for this calculation?
How do I use this lvl beam deflection calculator?
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- Delft University of Technology, L. Bosscher thesis, Appendix A.1 equations A.1–A.9: Euler–Bernoulli beam stiffnesshttps://repository.tudelft.nl/file/File_5cfe79e8-3268-45fd-a0a2-ec9130ea63b7
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
- USDA Wood Handbook 2021, Chapter 5, Table 5-3a and elastic-properties discussion; clear straight-grained woodhttps://research.fs.usda.gov/download/treesearch/62244.pdf