Beam calculators / Material & section models
Trace the load. Understand the beam.
Aluminum Beam Deflection Calculator
The editable 68.9 GPa E example is associated with cited 6061 material data, not every aluminum alloy. Calculate support reactions, shear force, bending moment, slope and elastic deflection for the stated simply supported beam.
Your beam, explained visually
Pin A · Roller BYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Aluminum Beam Deflection: model and interpretation
Continue with: Steel Beam Deflection Calculator · Steel Beam Point Load Calculator · Aluminum Beam Point Load Calculator · Wood Beam Deflection Calculator
Check the numbers
Aluminum Beam Deflection Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 68.9 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Downward uniform load = 5 kN/m.
| Output | Computed result |
|---|---|
| Maximum absolute elastic deflection | 13.804668 mm |
| Signed extreme deflection | -13.804668 mm upward |
| Deflection extreme location | 3 m from left |
| Maximum absolute deflection | 0.543491 in |
| Signed extreme moment | 22.5 kN·m sagging |
| Signed extreme shear | 15 kN |
| Signed extreme rotation | 0.007362 rad |
| Extreme-fibre bending magnitude | 38.045666 MPa |
| Section Ix | 8,870.9184 cm⁴ |
| Support at x=0 m vertical | 15 kN upward |
| Support at x=6 m vertical | 15 kN upward |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 m | Beam length / first span | 0.862792 mm |
| 4.5 m | Beam length / first span | 4.367883 mm |
| 6 m | Beam length / first span | 13.804668 mm |
| 7.5 m | Beam length / first span | 33.702804 mm |
| 9 m | Beam length / first span | 69.886134 mm |
| 12 m | Beam length / first span | 220.874695 mm |
Unchanged inputs use: Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 68.9 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Downward uniform load = 5 kN/m. Results retain the model limitations described above.
Common questions
Are the plotted lines also used to locate the maximum?
Does this include shear deformation or lateral-torsional buckling?
What limitation matters for this calculation?
How do I use this aluminum beam deflection calculator?
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- Delft University of Technology, L. Bosscher thesis, Appendix A.1 equations A.1–A.9: Euler–Bernoulli beam stiffnesshttps://repository.tudelft.nl/file/File_5cfe79e8-3268-45fd-a0a2-ec9130ea63b7
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
- McKechnie Aluminium: 6061 properties, Revision 6 April 2023, tensile/compressive modulushttps://www.mckechnie.co.nz/uploads/PDF/Technical-Specifications/Aluminium-Specifications/6061%20Revision%206.pdf?t=1760918400136