Beam calculators / Material & section models
Trace the load. Understand the beam.
Glulam Beam Deflection Calculator
Use the effective bending stiffness applicable to the actual layup and orientation; no product grade selection. Calculate support reactions, shear force, bending moment, slope and elastic deflection for the stated simply supported beam.
Your beam, explained visually
Pin A · Roller BYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Glulam Beam Deflection: model and interpretation
Continue with: Steel Beam Deflection Calculator · Steel Beam Point Load Calculator · Aluminum Beam Deflection Calculator · Aluminum Beam Point Load Calculator
Check the numbers
Glulam Beam Deflection Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 12 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Downward uniform load = 5 kN/m.
| Output | Computed result |
|---|---|
| Maximum absolute elastic deflection | 20.833333 mm |
| Signed extreme deflection | -20.833333 mm upward |
| Deflection extreme location | 3 m from left |
| Maximum absolute deflection | 0.82021 in |
| Signed extreme moment | 22.5 kN·m sagging |
| Signed extreme shear | 15 kN |
| Signed extreme rotation | 0.011111 rad |
| Extreme-fibre bending magnitude | 10 MPa |
| Section Ix | 33,750 cm⁴ |
| Support at x=0 m vertical | 15 kN upward |
| Support at x=6 m vertical | 15 kN upward |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 m | Beam length / first span | 1.302083 mm |
| 4.5 m | Beam length / first span | 6.591797 mm |
| 6 m | Beam length / first span | 20.833333 mm |
| 7.5 m | Beam length / first span | 50.86263 mm |
| 9 m | Beam length / first span | 105.46875 mm |
| 12 m | Beam length / first span | 333.333333 mm |
Unchanged inputs use: Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 12 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Downward uniform load = 5 kN/m. Results retain the model limitations described above.
Common questions
Are the plotted lines also used to locate the maximum?
Does this include shear deformation or lateral-torsional buckling?
What limitation matters for this calculation?
How do I use this glulam beam deflection calculator?
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- Delft University of Technology, L. Bosscher thesis, Appendix A.1 equations A.1–A.9: Euler–Bernoulli beam stiffnesshttps://repository.tudelft.nl/file/File_5cfe79e8-3268-45fd-a0a2-ec9130ea63b7
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
- USDA Wood Handbook 2021, Chapter 5, Table 5-3a and elastic-properties discussion; clear straight-grained woodhttps://research.fs.usda.gov/download/treesearch/62244.pdf