Beam calculators / Material & section models
Trace the load. Understand the beam.
Glulam Beam Point Load Calculator
Use the effective bending stiffness applicable to the actual layup and orientation; no product grade selection. Calculate support reactions, shear force, bending moment, slope and elastic deflection for the stated simply supported beam.
Your beam, explained visually
Pin A · Roller BYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Glulam Beam Point Load: model and interpretation
Continue with: Steel Beam Deflection Calculator · Steel Beam Point Load Calculator · Aluminum Beam Deflection Calculator · Aluminum Beam Point Load Calculator
Check the numbers
Glulam Beam Point Load Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 12 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Downward point load = 10 kN; Load position / total length = 0.5 ratio.
| Output | Computed result |
|---|---|
| Maximum absolute elastic deflection | 11.111111 mm |
| Signed extreme deflection | -11.111111 mm upward |
| Deflection extreme location | 3 m from left |
| Maximum absolute deflection | 0.437445 in |
| Signed extreme moment | 15 kN·m sagging |
| Signed extreme shear | 5 kN |
| Signed extreme rotation | 0.005556 rad |
| Extreme-fibre bending magnitude | 6.666667 MPa |
| Section Ix | 33,750 cm⁴ |
| Support at x=0 m vertical | 5 kN upward |
| Support at x=6 m vertical | 5 kN upward |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 m | Beam length / first span | 1.388889 mm |
| 4.5 m | Beam length / first span | 4.6875 mm |
| 6 m | Beam length / first span | 11.111111 mm |
| 7.5 m | Beam length / first span | 21.701389 mm |
| 9 m | Beam length / first span | 37.5 mm |
| 12 m | Beam length / first span | 88.888889 mm |
Unchanged inputs use: Dimension units = Metric dimensions; Beam length / first span = 6 m; Entered elastic modulus = 12 GPa; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Downward point load = 10 kN; Load position / total length = 0.5 ratio. Results retain the model limitations described above.
Common questions
Are the plotted lines also used to locate the maximum?
Does this include shear deformation or lateral-torsional buckling?
What limitation matters for this calculation?
How do I use this glulam beam point load calculator?
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- Delft University of Technology, L. Bosscher thesis, Appendix A.1 equations A.1–A.9: Euler–Bernoulli beam stiffnesshttps://repository.tudelft.nl/file/File_5cfe79e8-3268-45fd-a0a2-ec9130ea63b7
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
- USDA Wood Handbook 2021, Chapter 5, Table 5-3a and elastic-properties discussion; clear straight-grained woodhttps://research.fs.usda.gov/download/treesearch/62244.pdf