Beam calculators / Optical & lighting beams
Trace the load. Understand the beam.
Gaussian Beam Divergence Calculator
Calculate ideal Gaussian far-field divergence from a supplied waist radius and wavelength.
Your light beam, explained visually
Optical modelYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
θ is the far-field half-angle. w₀ is the 1/e² waist radius and λ is wavelength.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Gaussian Beam Divergence: model and interpretation
Continue with: Gaussian Beam Propagation Calculator · Gaussian Beam Waist from Divergence Calculator · Gaussian Beam Peak Intensity Calculator · Lighting Beam Angle Footprint Calculator
Check the numbers
Gaussian Beam Divergence Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
1/e² waist radius = 0.5 mm; Vacuum wavelength = 1064 nm.
| Output | Computed result |
|---|---|
| Ideal Gaussian far-field divergence | 0.677363 mrad half-angle |
| Full-angle divergence | 1.354727 mrad |
| Rayleigh range | 0.738156 m |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 0.25 mm | 1/e² waist radius | 1.354727 mrad half-angle |
| 0.375 mm | 1/e² waist radius | 0.903151 mrad half-angle |
| 0.5 mm | 1/e² waist radius | 0.677363 mrad half-angle |
| 0.625 mm | 1/e² waist radius | 0.541891 mrad half-angle |
| 0.75 mm | 1/e² waist radius | 0.451576 mrad half-angle |
| 1 mm | 1/e² waist radius | 0.338682 mrad half-angle |
Unchanged inputs use: 1/e² waist radius = 0.5 mm; Vacuum wavelength = 1064 nm. Results retain the model limitations described above.
Common questions
What limitation matters for this calculation?
How do I use this gaussian beam divergence calculator?
θ is the far-field half-angle. w₀ is the 1/e² waist radius and λ is wavelength.
What do the starting values represent?
Does this calculate a structural beam?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- Edmund Optics, Propagation of a Gaussian Beam Through a Thin Lens, equations 1–5 and 25–26https://www.edmundoptics.ca/knowledge-center/application-notes/lasers/gaussian-beam-propagation/
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors