Beam calculators / Dynamics & axial buckling
Trace the load. Understand the beam.
Simply Supported Beam Natural Frequency Calculator
Calculate first ideal transverse bending frequency for a simply supported uniform beam.
Your model, explained visually
Model geometryYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
μ is mass per unit length. β₁ is the boundary-condition root used by this page; stiffness and mass must use consistent units.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Simply Supported Beam Natural Frequency: model and interpretation
Continue with: Cantilever Beam Natural Frequency Calculator · Fixed Both Ends Beam Natural Frequency Calculator · Beam Euler Axial Buckling Calculator · Beam Calculator
Check the numbers
Simply Supported Beam Natural Frequency Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Beam length / first span = 6 m; Elastic modulus = 200 GPa; Second moment of area = 8000 cm⁴; Uniform mass per length = 30 kg/m.
| Output | Computed result |
|---|---|
| First ideal transverse bending frequency | 31.865207 Hz |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 m | Beam length / first span | 127.460827 Hz |
| 4.5 m | Beam length / first span | 56.649256 Hz |
| 6 m | Beam length / first span | 31.865207 Hz |
| 7.5 m | Beam length / first span | 20.393732 Hz |
| 9 m | Beam length / first span | 14.162314 Hz |
| 12 m | Beam length / first span | 7.966302 Hz |
Unchanged inputs use: Dimension units = Metric dimensions; Beam length / first span = 6 m; Elastic modulus = 200 GPa; Second moment of area = 8000 cm⁴; Uniform mass per length = 30 kg/m. Results retain the model limitations described above.
Common questions
What limitation matters for this calculation?
How do I use this simply supported beam natural frequency calculator?
μ is mass per unit length. β₁ is the boundary-condition root used by this page; stiffness and mass must use consistent units.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- University of Nebraska–Lincoln, S. Whitney: Vibrations of Cantilever Beamshttps://emweb.unl.edu/mechanics-pages/scott-whitney/325hweb/beams.htm
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
- University of Nebraska–Lincoln, S. Whitney: Vibrations of Cantilever Beamshttps://emweb.unl.edu/mechanics-pages/scott-whitney/325hweb/beams.htm