Beam calculators / Weight, surface & cost
Trace the load. Understand the beam.
I Beam Weight Calculator
Calculate theoretical i beam mass, kg/m, lb/ft and gravitational line load from actual dimensions.
Your section, explained visually
Section geometryYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
m is theoretical mass; A is section area; ρ is mass density; g is gravitational acceleration.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
I Beam Weight: model and interpretation
Continue with: Rectangular Beam Weight Calculator · Box Beam Weight Calculator · T Beam Weight Calculator · I Beam Surface Area Calculator
Check the numbers
I Beam Weight Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Beam length / first span = 6 m; Supplied material density = 7850 kg/m³.
| Output | Computed result |
|---|---|
| Theoretical dimensioned beam mass | 273.5568 kg |
| Mass | 603.08951 lb |
| Mass per length | 45.5928 kg/m |
| Mass per length | 30.636947 lb/ft |
| Gravity self-weight line load | 0.447113 kN/m |
| Material volume | 0.034848 m³ |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 m | Beam length / first span | 136.7784 kg |
| 4.5 m | Beam length / first span | 205.1676 kg |
| 6 m | Beam length / first span | 273.5568 kg |
| 7.5 m | Beam length / first span | 341.946 kg |
| 9 m | Beam length / first span | 410.3352 kg |
| 12 m | Beam length / first span | 547.1136 kg |
Unchanged inputs use: Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Beam length / first span = 6 m; Supplied material density = 7850 kg/m³. Results retain the model limitations described above.
Common questions
What limitation matters for this calculation?
How do I use this i beam beam weight calculator?
m is theoretical mass; A is section area; ρ is mass density; g is gravitational acceleration.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- OpenStax University Physics, density is mass per volumehttps://openstax.org/books/university-physics-volume-1/pages/14-1-fluids-density-and-pressure
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors