Beam calculators / Stress & stiffness
Trace the load. Understand the beam.
I Beam Bending and Shear Stress Calculator
Calculate extreme-fibre elastic bending stress and neutral-axis beam shear stress.
Your section, explained visually
Section geometryYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Normal stress is tension-positive. Q is the first area moment above the neutral axis; b at the neutral axis is the local material breadth.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
I Beam Bending and Shear Stress: model and interpretation
Continue with: Rectangular Beam Bending and Shear Stress Calculator · Box Beam Bending and Shear Stress Calculator · Circular Beam Bending and Shear Stress Calculator · Beam Flexural Stiffness Calculator
Check the numbers
I Beam Bending and Shear Stress Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Signed bending moment = 10 kN·m; Shear force magnitude = 10 kN.
| Output | Computed result |
|---|---|
| Largest absolute extreme-fibre bending stress | 16.909185 MPa |
| Top normal stress (tension positive) | -16.909185 MPa |
| Bottom normal stress (tension positive) | 16.909185 MPa |
| Neutral-axis transverse shear magnitude | 4.725779 MPa |
| First moment above neutral axis | 335,376 mm³ |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 5 kN·m | Signed bending moment | 8.454592 MPa |
| 7.5 kN·m | Signed bending moment | 12.681889 MPa |
| 10 kN·m | Signed bending moment | 16.909185 MPa |
| 12.5 kN·m | Signed bending moment | 21.136481 MPa |
| 15 kN·m | Signed bending moment | 25.363777 MPa |
| 20 kN·m | Signed bending moment | 33.81837 MPa |
Unchanged inputs use: Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Signed bending moment = 10 kN·m; Shear force magnitude = 10 kN. Results retain the model limitations described above.
Common questions
What limitation matters for this calculation?
How do I use this i beam beam bending and shear stress calculator?
Normal stress is tension-positive. Q is the first area moment above the neutral axis; b at the neutral axis is the local material breadth.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors
- Jonkoping University Applied Mechanics: Beam Theory, first moment, transverse shear and section modulushttps://mechanics.ju.se/SolidMechanics/BeamTheory.html
- University of Illinois: Introductory Solid Mechanics, beams in bending and transformed sectionshttps://mechref.engr.illinois.edu/sol/bending.html