Beam calculators / Model-only limits
Trace the load. Understand the beam.
I Beam Elastic Span Bound Calculator
Find the smaller bending-reference and deflection-reference span bound under the printed elastic model.
Your model, explained visually
Model geometryYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Simply supported beam under a uniform load. Compare bending stress with the supplied reference and deflection with L/n.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
I Beam Elastic Span Bound: model and interpretation
Continue with: Rectangular Beam Model Load Bound Calculator · Rectangular Beam Elastic Span Bound Calculator · I Beam Model Load Bound Calculator · Box Beam Model Load Bound Calculator
Check the numbers
I Beam Elastic Span Bound Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Entered elastic modulus = 200 GPa; Supplied reference bending stress = 150 MPa; Chosen deflection denominator L/n = 360 ; Downward uniform load = 5 kN/m.
| Output | Computed result |
|---|---|
| Smallest model-only simple span bound | 9.113722 m |
| Bending-reference span | 11.913635 m |
| Deflection-reference span | 9.113722 m |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 2.5 kN/m | Downward uniform load | 11.48257 m |
| 3.75 kN/m | Downward uniform load | 10.030949 m |
| 5 kN/m | Downward uniform load | 9.113722 m |
| 6.25 kN/m | Downward uniform load | 8.46043 m |
| 7.5 kN/m | Downward uniform load | 7.961569 m |
| 10 kN/m | Downward uniform load | 7.233566 m |
Unchanged inputs use: Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm; Entered elastic modulus = 200 GPa; Supplied reference bending stress = 150 MPa; Chosen deflection denominator L/n = 360 ; Downward uniform load = 5 kN/m. Results retain the model limitations described above.
Common questions
What limitation matters for this calculation?
How do I use this i beam beam elastic span bound calculator?
Simply supported beam under a uniform load. Compare bending stress with the supplied reference and deflection with L/n.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors