Beam calculators / Cross-section geometry
Trace the load. Understand the beam.
Angle Section Properties Calculator
Calculate area, centroid, second moments of area and elastic section moduli for an ideal angle cross section.
Your section, explained visually
Section geometryYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Composite parts use their own centroidal second moments and distances to the overall centroid. S is the elastic section modulus.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Angle Section Properties: model and interpretation
Continue with: Rectangular Section Properties Calculator · Circular Section Properties Calculator · Box Section Properties Calculator · Hollow Circular Section Properties Calculator
Check the numbers
Angle Section Properties Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm.
| Output | Computed result |
|---|---|
| Centroidal horizontal-axis second moment | 3,868.369011 cm⁴ |
| Area | 4,104 mm² |
| Centroid x from left | 35.140351 mm |
| Centroid y from bottom | 90.210526 mm |
| Centroidal Iy | 848.135116 cm⁴ |
| Centroidal product Ixy | -1,076.210526 cm⁴ |
| Principal Imax | 4,212.620498 cm⁴ |
| Principal Imin | 503.883628 cm⁴ |
| Elastic Sx top | 184.392903 cm³ |
| Elastic Sx bottom | 428.815701 cm³ |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 150 mm | Overall section depth | 562.282155 cm⁴ |
| 225 mm | Overall section depth | 1,754.255108 cm⁴ |
| 300 mm | Overall section depth | 3,868.369011 cm⁴ |
| 375 mm | Overall section depth | 7,097.618397 cm⁴ |
| 450 mm | Overall section depth | 11,624.027424 cm⁴ |
| 600 mm | Overall section depth | 25,271.929966 cm⁴ |
Unchanged inputs use: Dimension units = Metric dimensions; Overall flange / section width = 150 mm; Overall section depth = 300 mm; Web thickness = 8 mm; Flange thickness = 12 mm. Results retain the model limitations described above.
Common questions
What limitation matters for this calculation?
How do I use this angle section properties calculator?
Composite parts use their own centroidal second moments and distances to the overall centroid. S is the elastic section modulus.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors