Beam calculators / Supports & loading
Trace the load. Understand the beam.
Overhanging Beam Triangular Load Calculator
Downward load is positive in the form; upward reactions, counterclockwise rotations and sagging moments are positive in the output. Calculate support reactions, shear force, bending moment, slope and elastic deflection for the stated overhang beam.
Your beam, explained visually
Two supports · OverhangYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Overhanging Beam Triangular Load: model and interpretation
Continue with: Beam Calculator · Simply Supported Beam Uniform Load Calculator · Simply Supported Beam Point Load Calculator · Simply Supported Beam Triangular Load Calculator
Check the numbers
Overhanging Beam Triangular Load Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Beam length / first span = 6 m; Second support / total length = 0.75 ratio; Entered elastic modulus = 200 GPa; Second moment of area Ix = 8000 cm⁴; Extreme-fibre distance = 150 mm; Downward line load at right end = 10 kN/m.
| Output | Computed result |
|---|---|
| Maximum absolute elastic deflection | 0.444336 mm |
| Signed extreme deflection | -0.444336 mm upward |
| Deflection extreme location | 1.999805 m from left |
| Maximum absolute deflection | 0.017494 in |
| Signed extreme moment | -10.3125 kN·m sagging |
| Signed extreme shear | -13.541667 kN |
| Signed extreme rotation | -0.000347 rad |
| Extreme-fibre bending magnitude | 19.335937 MPa |
| Section Ix | 8,000 cm⁴ |
| Support at x=0 m vertical | 3.333333 kN upward |
| Support at x=4.5 m vertical | 26.666667 kN upward |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 m | Beam length / first span | 0.027771 mm |
| 4.5 m | Beam length / first span | 0.140591 mm |
| 6 m | Beam length / first span | 0.444336 mm |
| 7.5 m | Beam length / first span | 1.084805 mm |
| 9 m | Beam length / first span | 2.249451 mm |
| 12 m | Beam length / first span | 7.109375 mm |
Unchanged inputs use: Dimension units = Metric dimensions; Beam length / first span = 6 m; Second support / total length = 0.75 ratio; Entered elastic modulus = 200 GPa; Second moment of area Ix = 8000 cm⁴; Extreme-fibre distance = 150 mm; Downward line load at right end = 10 kN/m. Results retain the model limitations described above.
Common questions
Are the plotted lines also used to locate the maximum?
Does this include shear deformation or lateral-torsional buckling?
What limitation matters for this calculation?
How do I use this overhanging beam triangular load calculator?
Hermite beam stiffness uses consistent distributed loads. Exact element load integration recovers the response; q(x) is positive upward.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- Delft University of Technology, L. Bosscher thesis, Appendix A.1 equations A.1–A.9: Euler–Bernoulli beam stiffnesshttps://repository.tudelft.nl/file/File_5cfe79e8-3268-45fd-a0a2-ec9130ea63b7
- Penn State Mechanics Map: area moments of inertia by composite parts and parallel-axis theoremhttps://mechanicsmap.psu.edu/websites/A2_moment_intergrals/A2-9_area_moments_composite/areamomentcomposite.html
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors