Beam calculators / Supports & loading
Trace the load. Understand the beam.
Simply Supported Beam Influence Line Calculator
Evaluate simple-beam reaction, section shear and section moment influence ordinates for a moving unit load.
Your model, explained visually
Model geometryYour beam & loading inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
a is moving-load distance from the left support and x is the section coordinate. These are simple-beam influence ordinates.
- Confirm support constraints, loading plane, section and units.
- Enter actual geometry, loads and justified material properties.
- Submit the form, then interpret the result with the assumptions and limits below.
Simply Supported Beam Influence Line: model and interpretation
Continue with: Beam Calculator · Simply Supported Beam Uniform Load Calculator · Simply Supported Beam Point Load Calculator · Simply Supported Beam Triangular Load Calculator
Check the numbers
Simply Supported Beam Influence Line Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Dimension units = Metric dimensions; Beam length / first span = 6 m; Unit moving-load position / span = 0.4 ratio; Observation section / span = 0.5 ratio.
| Output | Computed result |
|---|---|
| Left reaction influence ordinate | 0.6 reaction/load |
| Right reaction / unit load | 0.4 |
| Section moment / unit load | 1.2 m |
| Section shear left limit / unit load | -0.4 |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 0 ratio | Unit moving-load position / span | 1 reaction/load |
| 0.2 ratio | Unit moving-load position / span | 0.8 reaction/load |
| 0.4 ratio | Unit moving-load position / span | 0.6 reaction/load |
| 0.5 ratio | Unit moving-load position / span | 0.5 reaction/load |
| 0.7 ratio | Unit moving-load position / span | 0.3 reaction/load |
| 1 ratio | Unit moving-load position / span | 0 reaction/load |
Unchanged inputs use: Dimension units = Metric dimensions; Beam length / first span = 6 m; Unit moving-load position / span = 0.4 ratio; Observation section / span = 0.5 ratio. Results retain the model limitations described above.
Common questions
What limitation matters for this calculation?
How do I use this simply supported beam influence line calculator?
a is moving-load distance from the left support and x is the section coordinate. These are simple-beam influence ordinates.
What do the starting values represent?
Does this result establish a safe beam size?
Which unit system does the calculator use?
Can I export the calculation to Excel?
Where do the formulas come from?
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- American Wood Council Design Aid 6: Beam Design Formulas, simple uniform and central point-load caseshttps://awc.org/wp-content/uploads/2021/12/AWC-DA6-BeamFormulas-0710.pdf
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors